-
kalpakpune@gmail.com -
View Mobile Number - Send SMS
- Send Email
- GST No. 27ACEPS9085P1ZJ
Computerized Spring Tester
Leading Retailer, Manufacturers, Exporters, Wholesaler and Trader of STM-1-C Computerized Spring Testing Machine, STM-25-C Computerized Spring Testing Machine, STM-300-C Computerized Spring Testing Machine and STM-1000-C Computerized Spring Testing Machine from Pune.
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Power | 1000 Va |
| Capacity | 1 Kg |
| Maximum Load Capacity | 1 Kgf |
| Load Range Options | 50gm,100 gm, 200 gm, 500 gm, 1000 gm |
| Units of Measurement | gm/ N |
| Load Sensor | Suitable Load Cells |
| Load Resolution | 1 Part in 1000 or Better |
| Load Accuracy | +/- 0.5% of Reading |
| Actuator Drive | Digital Stepper Drive with Stepper Motor |
| Test Speed | 0.1- 100 Mm/min. with Resolution of 0.01 Mm/min |
| Length Sensor | Encoder |
| Length Resolution | 0.01mm |
| Speed Accuracy | Better Than 0.5 % |
| Test Height | 200 Mm, 350mm, |
| Operating /test Modes | Operating Modes like Tensile, Compression, Provided with Suitable Grips and Fixtures. |
| Display | PC Monitor |
| Units | (metric, Imperial and Si Units) |
| Size | 500(h) X 200 (w) X 300(d) Mm Nominal |
| Load Capacity | Up to 1Kg |
| Applications | Suitable for Tension as well as Compression for springs of all sizes. |
| Load Measuring Units | Selectable Load measurement in gm or N |
| Drive Mechanism | Ball screw driven by variable speed drive for zero backslash and excellent length accuracy. |
| Testing Area | Dual space i.e. above and below moving crosshead. |
| Software | Kalpak User-friendly windows based software STM-TEST-C for Machine Control, Data storage, |
| Test Capability | Load test with Length input Length Test with Load as input Spring rate, Free Length |
| 5 Step Test Method | Tests load v/s Deflection values at 5 programmed heights / loads |
| Tare | Auto and Anywhere Below Overload Setting. |
| Test Options | Choice of fully Automatic as well as Manual Mode |
| Safety Features | Emergency Stop, Over Travel Protection, Over Load protection |
| Type Testing | Unlimited sample Type testing |
| Programming | By PC Keyboard |
| Control Mechanism | Both Automatic & manual Through PC |
| Customization | We offer Customization to your test as well as Test Report requirements |
| Support | We offer Warrantee as well as Post Warrantee support for Preventive / Breakdown maintenance as well as Calibrationl |
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Power | 1000 Va |
| Capacity | 25 Kg |
| maximum Load Capacity | 25 Kgf |
| Load Range Options | 2 Kgf, 5 Kgf, 10 Kgf, 25 Kgf |
| Units of Measurement | Kgf,gm, N |
| Load Sensor | Suitable Load Cells |
| Load Resolution | 1 Part in 1000 or Better |
| Load Accuracy | +/- 0.5% of Reading |
| Actuator Drive | Digital Stepper Drive with Stepper Motor |
| Test Speed | 0.1- 100 Mm/min. with Resolution of 0.01 Mm/min |
| Length Sensor | Encoder |
| Length Resolution | 0.01mm |
| Speed Accuracy | Better Than 0.5 % |
| Test Height | 200 Mm, 350mm, 500 mm |
| Operating /test Modes | Operating Modes like Tensile, Compression, Provided with Suitable Grips and Fixtures. |
| Display | PC Monitor |
| Units | (metric, Imperial and Si Units) |
| Size | 800(h) X 400 (w) X 300(d) Mm Nominal |
| Load Capacity | Up to 25Kg |
| Applications | Suitable for Tension as well as Compression for springs of all sizes. |
| Load Measuring Units | Selectable Load measurement in Kgf or gm or N |
| Drive Mechanism | Ball screw driven by variable speed drive for zero backslash and excellent length accuracy. |
| Testing Area | Dual space i.e. above and below moving crosshead. |
| Software | Kalpak User-friendly windows based software STM-TEST-C for Machine Control, Data storage |
| Test Capability | Load test with Length input Length Test with Load as input Spring rate, Free Length |
| 5 Step Test Method | Tests load v/s Deflection values at 5 programmed heights / loads |
| Tare | Auto and anywhere below overload setting. |
| Test Options | Choice of fully Automatic as well as Manual Mode |
| Safety Features | Emergency Stop, Over Travel Protection, Over Load protection |
| Type Testing | Unlimited sample Type testing |
| Programming | By PC Keyboard |
| Control Mechanism | Both Automatic & manual Through PC |
| Customization | We offer Customization to your test as well as Test Report requirements |
| Support | We offer Warrantee as well as Post Warrantee support for Preventive / Breakdown maintenance |
| Business Type | Manufacturer, Supplier, Retailer |
| Capacity | 300 Kg |
| Maximum Load Capacity | 300 Kgf |
| Load Range Options | 1,2,5,10,25,50 Kg,100 Kg, 300 Kg |
| Units of Measurement | Lb/ Kgf (gm)/ N |
| Load Sensor | Suitable Load Cell |
| Load Resolution | 1 Part in 1000 or Better |
| Load Accuracy | +/- 0.5% of Reading for 2% to 100% Load Capacity |
| Actuator Drive | Digital Ac Servo Drive with Servo Motor |
| Test Speed | 0.1- 100 Mm/min. with Resolution of 0.01 Mm/min |
| Length Sensor | Encoder |
| Length Resolution | 0.01mm |
| Speed Accuracy | Better Than 0.5 % |
| Test Height | 450 Mm, 750mm Max |
| Width | 200 Mm |
| Operating /test Modes | Operating Modes like Tensile, Compression, Provided with Suitable Grips and Fixtures. |
| Display | Display Result in Numerical and Graphical Display On Pc Monitor |
| Units | (metric, Imperial and Si Units) |
| Power | 230v 50 Hz, 1000 Va |
| Size | 1200(h) X 500 (w) X 500(d) Mm Nominal |
Application
- Automotive Springs
- Alloy Springs
- Beryllium Copper Springs
- Belleville Springs
- Disk Springs
- Brush Holder Springs
- Clock Springs
- Clutch Springs
- Cold Wound Spring
- Compression Springs
- Conical Springs
- Die Springs
- Engine Valve Springs
- Extension Springs
- Flat Springs Springs
- Hair Springs
- Phosphor Bronze Springs
- Precision Springs
- Rubber Springs
- Stainless Steel Springs
- Tension Springs
- Valve Springsbration Absorption Springs
- Wire Springs
Features
| Maximum Load Capacity | Up to 300 Kg |
| Load Range Options | 1,2,5,10,25,50Kg,100 Kg, 300 Kg |
| Applications | Suitable for Tension as well as Compression for springs of all sizes. |
| Load Measuring Units | Selectable Load measurement in Lbs, Kg, gm or N |
| Drive Mechanism | Ball screw driven by variable speed drive for zero backslash and excellent length accuracy. |
| Testing Area | Dual space i.e. above and below moving crosshead. |
| Output | Rs 232 for PC Communication -Parallel port for printer. |
| Software | Kalpak User-friendly windows based software STM-TEST-C for Machine Control, Data storage, retrieval and analysis |
| Test Capability | Load test with Length input Length Test with Load as input Spring rate, Free Length |
| 5 Step Test Method | Tests load v/s Deflection values at 5 programmed heights / loads |
| Tare | Auto and anywhere below overload setting. |
| Test Options | Choice of fully Automatic as well as Manual Mode |
| Safety Features | Emergency Stop, Over Travel Protection, Over Load protection |
| Type Testing | Unlimited sample Type testing |
| Programming | By PC Keyboard |
| Display | PC Monitor |
| Control Mechanism | Both Automatic & manual Through PC |
| Customization | We offer Customization to your test as well as Test Report requirements |
| Support | We offer Warrantee as well as Post Warrantee support for Preventive / Breakdown maintenance as well as Calibration |
| Business Type | Manufacturer, Supplier, Retailer |
| Power | Uses 230v 50 Hz, 1000 Va |
| Capacity | 1000 Kg |
| maximum Load Capacity | 1000 Kgf |
| Load Range Options | 50kg,100 Kg, 200 Kg,300 Kg, 500 Kg, 1000 Kg |
| Units of Measurement | Lb/ Kgf (gm)/ N |
| LOAD SENSOR | Suitable Load Cells |
| Load Resolution | 1 Part in 1000 or Better |
| Load Accuracy | +/- 0.5% of Reading |
| Actuator Drive | Digital Ac Servo Drive with Servo Motor |
| Test Speed | 0.1- 100 Mm/min. with Resolution of 0.01 Mm/min |
| Length Sensor | Encoder |
| Length Resolution | 0.01mm |
| Speed Accuracy | Better Than 0.5 % |
| Test Height | 450 Mm, 750mm, 1000mm, 1500mm Max |
| WIDTH | 400 mm |
| Operating /test Modes | Operating Modes like Tensile, Compression, Provided with Suitable Grips and Fixtures. |
| Display | Display Result in Numerical and Graphical Display On Pc Monitor |
| Units | (metric, Imperial and Si Units) |
| Size | 1700(h) X 800 (w) X 500(d) Mm Nominal |
Application
- Automotive Springs
- Alloy Springs
- Beryllium Copper Springs
- Belleville Springs
- Disk Springs
- Brush Holder Springs
- Clock Springs
- Clutch Springs
- Cold Wound Springs
- Compression Springs
- Conical Springs
- Die Springs
- Engine Valve Springs
- Extension Springs
- Flat Springs Springs
- Hair Springs
- Phosphor Bronze Springs
- Precision Springs
- Rubber Springs
- Stainless Steel Springs
- Tension Springs
- Valve Springs
- Vibration Absorption Springs
- Wire Springs
Features
| Load Capacity | Up to 1000 Kg |
| Load Range Options | 50Kg,100 Kg, 200 Kg,300 Kg, 500 Kg, 1000 Kg |
| Applications | Suitable for Tension as well as Compression for springs of all sizes. |
| Load Measuring Units | Selectable Load measurement in Lbs, Kg, gm or N |
| Drive Mechanism | Ball screw driven by variable speed drive for zero backslash and excellent length accuracy. |
| Testing Area | Dual space i.e. above and below moving crosshead. |
| Software | Kalpak User-friendly windows based software STM-TEST-C for Machine Control, Data storage, retrieval and analysis. |
| Test Capability | Load test with Length input Length Test with Load as input Spring rate, Free Length |
| 5 Step Test Method | Tests load v/s Deflection values at 5 programmed heights / loads |
| Tare | Auto and anywhere below overload setting. |
| Test Options | Choice of fully Automatic as well as Manual Mode |
| Safety Features | Emergency Stop, Over Travel Protection, Over Load protection |
| Type Testing | Unlimited sample Type testing |
| Programming | By PC Keyboard |
| Display | PC Monitor |
| Control Mechanism | Both Automatic & manual Through PC |
| Customization | We offer Customization to your test as well as Test Report requirements |
| Support | We offer Warrantee as well as Post Warrantee support for Preventive / Breakdown maintenance as well as Calibration |
